How do I locate high-grade switches and outlets?

How do I determine the location of my high grade switches and sockets?

A switched outlet is an outlet with a switch and socket in the panel. The switch and outlet are independent. The switch can be used to control power to the outlet or light. Most of them are used to control the power to the socket. Many devices have a standby function. And the specifications of sockets with switches are very common. It is also very easy to use in daily life.

In life and work, marine switches, key switches, buttons high-grade switches and sockets are located in an unreasonable position or not, will bring a lot of inconvenience to the future life. High-grade switch manufacturers have the following experience in the design:

1. The height of the switch panel: usually, there is no problem with the general height, but you have to consider is that if both hands have something, you like how to turn on the light.

For example, when I hold something with both hands, I like to use my forehead to turn on the light, so the height of the switch I design should be suitable for the position where I can turn on the light with my forehead, and some people like to turn on the light with the elbow, then the height of his design should be suitable for the light on the elbow.

2. When you are standing at the door, you should set the switch for each room so that you can easily reach the position with your hand. If the design is too close to the interior, you will have to take a step or two in the dark to turn it on, and you are likely to hit something unseen.

3. Most people place their sockets low, but consider that certain sockets should be kept high, such as sockets for irons, which should be the same height as the ironing board.

4. There should be at least one socket in each room that will not be blocked by anything to make it easier to use devices such as hoovers in the future.